Gupfo Pfohl - Glue with white plastic roller

Gupfo Pfohl - Glue with white plastic roller

Closed-cell, rough surface, therefore no swelling when stored in water, surface insensitive to damage, easily washable, suitable for white glue, Kauri glue and hot-press glue.

The advantages of the Pfohl gluers!

1. Completely even and metered application of glue.
2. No scraping of glue on the edges of joints and lattice gluing.
3. Effortless glue application on curved surfaces.
4. Possibility of using glues with shorter open times even with large surfaces, which enables shorter pressing times - thus better utilization of the presses.
5. For glues and adhesives of all kinds.
6. Compared to the previous brush and spatula application, approx. 30% glue savings.
7. Also at least 50% labor saving.

Operation manual:
Swivel the locking bracket in the direction of the handle and fill the glue container with glue or glue.
The locking bracket is then to be tilted forward and rolled over the surface strip by strip, which will apply the glue to the surface.
The glue feed is interrupted by swiveling the locking bar back and the glue is distributed completely evenly by rolling it over again.
Notice ! If you remove the dosing roller when cleaning the glue - beware of the sharp edge - only clean this area with tools! e.g. brush.

Maintenance:

Thanks to the closed-cell plastic quality, this roller can be stored in water after using white glue without it swelling. When using hot press glue or kaurit glue, the roller is only washed off.