Pfohl - Gluer with brown solid rubber roller

Pfohl - Gluer with brown solid rubber roller

Solvent-resistant, hard, suitable for all types of solvent-based adhesives, including rubber solutions.

The advantages of the Pfohl gluers!

1. Completely even and metered application of glue.
2. No scraping of glue on the edges of joints and lattice gluing.
3. Effortless glue application on curved surfaces.
4. Possibility of using glues with shorter open times even with large surfaces, which enables shorter pressing times - thus better utilization of the presses.
5. For glues and adhesives of all kinds.
6. Compared to the previous brush and spatula application, approx. 30% glue savings.
7. Also at least 50% labor saving.

Operation manual:
Swivel the locking bracket in the direction of the handle and fill the glue container with glue or glue.
The locking bracket is then to be tilted forward and rolled over the surface strip by strip, which will apply the glue to the surface.
The glue feed is interrupted by swiveling the locking bar back and the glue is distributed completely evenly by rolling it over again.
A notice ! If you remove the dosing roller when cleaning the glue - beware of the sharp edge - only clean this area with tools! e.g. brush.

Care :

After work, this roller is cleaned with a brush or cloth with solvent and left in the air. Under no circumstances should the roller be left in the solvent for several hours, as the roller would expand and no longer fit firmly on the axle.